Important Information; Solving Problems - Uniden D1685 User Manual

2. During the greeting or beeps, press
code. If you enter it incorrectly 3 times, the system hangs up and returns to
standby.
3. The system announces the time, number of
messages in memory, and a help prompt. It
beeps to indicate it's waiting for a command.
4. When you hear beeping, enter a 2-digit
command from the chart. Enter both digits
within 2 seconds or the entry times out.
#
If you don't press any keys for 15 seconds,
the system hangs up and returns to
standby.

IMPORTANT INFORMATION

Solving Problems

If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems
No stations can make or
receive calls.
A handset can't make or
receive calls.
A station can make calls,
but it won't ring.
A handset is not working.
The phone keeps ringing
when I answer on an
extension.
Audio issues
Callers sound
weak or soft.
English - 18
Possible solutions
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
x Move the handset closer to the base.
x Make sure the ringer is turned on.
x Make sure Silent Mode is turned off (see page 12).
x Charge the battery for 15-20 hours.
x Check the battery connection.
x You may have to change the line mode. Contact
Customer Service for instructions.
Possible solutions
x Move the handset closer to the base or Range Extender.
x Keep the handset's battery fully charged.
x Increase the earpiece volume.
0 and immediately enter your security
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts