Troubleshooting - Uniden 7000A Operating Manual

TROUBLESHOOTING

If your 7000A DTAM unit is not performing to your expectations, please try these
simple steps. If you are still unable to resolve the problems, contact Uniden
Customer Service for assistance.
New Zealand: 0800 4 UNIDEN
PROBLEM
Answering system does not work
Answering System does not answers
after 3 rings.
Messages are incomplete.
No sound on the base unit speaker during • Adjust the volume control on the side of
call monitoring or message playback.
Cannot record outgoing message (OGM)
Australia: 1800 632 789
4 864336
• Make sure the telephone line cord
• Make sure that the AC Adaptor
• Make sure the DTAM is turned on.
• There has been a power failure.
• The memory may be full. Delete some
• The incoming messages may be too long.
• The memory may be full. Delete some
• The memory may be full. Delete some or
37
SUGGESTION
is plugged in.
is plugged in.
Disconnect the telephone line cord,
press the reset button and re-connect
the telephone line cord.
or all of the saved messages.
or all of the saved messages.
the DTAM. Refer page 27
all of the saved messages.
Continued over....