Installing The Fan; Board I/O; Removing The I/O Board - Dell Inspiron 5400 2n1 Service Manual

3. Lift the fan off the palm-rest and keyboard assembly.

Installing the fan

Prerequisites
Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
About this task
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
Steps
1. Using the alignment posts, place the fan on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the system fan to the palm-rest and keyboard assembly.
3. Connect the fan cable to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Board I/O

Removing the I/O board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
After working inside your computer.
Before working inside your computer.
Melepaskan dan memasang komponen 37