Installing The Power-Adapter Port - Dell Inspiron 5400 2n1 Service Manual

Steps
1. Remove the three screws (M2.5x5) that secure the right display-hinge to the palm-rest and keyboard assembly.
2. Open the right display-hinge at an angle of 90 degrees.
3. Peel the tape that secures the power-adapter port cable to the system board.
4. Disconnect the power-adapter port cable from the system board.
5. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
6. Lift the power-adapter port along with its cable, off the palm-rest and keyboard assembly.

Installing the power-adapter port

Prerequisites
Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
Melepaskan dan memasang komponen 27