Port Adaptor Daya; Removing The Power-Adapter Port - Dell Inspiron 5400 2n1 Service Manual

Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Port adaptor daya

Removing the power-adapter port

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
26 Melepaskan dan memasang komponen
After working inside your computer.
Before working inside your computer.