AHU CONTROL KIT SETTINGS
Check Module Configuration
- After installing the Control Kit, the first thing
you should do is check the module settings
inside the Control Kit.
The DIP switches for the main module, UI
module, and UO module are configured in
the following order.
- The default setting of the DIP switches for
the main module, UI module, and UO
module is OFF. Do not change the settings
arbitrarily.
Main Module
UI Module
UO Module
The default setting for all DIP switches is OFF. (factory condition)
(UI Module)
(UO Module)
AHU CONTROL KIT SETTINGS
Main Module
UO Module
UI Module
EEV Module
(Main Module)
13