If Service Is Required; Replacement Parts - U-Line 75 User Manual

Problem
No ice
Not enough ice
Water leaks into
ice bucket
Fresh food section
on Combo units
too cold
Unit too cold

IF SERVICE IS REQUIRED

If the need for service arises, contact the dealer from whom the unit
was purchased. State the Model Number and Serial Number and
explain the problem. The Model and Serial Number plate is located
inside unit at upper right hand corner, except for models 95, 98 and
SP18, which have the plate located behind the ice bucket. If you do not
know the name of the selling dealer or local service company, you can
check on-line at www.U-LineService.com.

REPLACEMENT PARTS

Use only genuine U-Line replacement parts. Genuine U-Line parts are
designed to work correctly with U-Line products and offer superior ser-
vice life. The use of non-U-Line parts can damage the unit and may void
the warranty.
Possible Cause
Bin arm locked in
upright position
No water to unit.
Control set too cold
Ice cube size too
large
Dirty condenser coils.
Water level set too
high
Ice bucket not fully
inserted
Flap door not closed
correctly
Temperature control
set too cold
51
Remedy
Lower bin arm.
Turn on water or contact
plumber.
Adjust control to a
warmer setting
(COUNTERCLOCKWISE).
Set cube size smaller.
See ADJUSTING ICE
CUBE SIZE.
Clean condenser.
See CLEANING AND
MAINTENANCE.
Set cube size smaller.
See ADJUSTING ICE
CUBE SIZE.
Push ice bucket
into place.
Be sure Flap door is
closed correctly.
Set control to warmer setting
(COUNTERCLOCKWISE).