Grille Installation - U-Line 75 User Manual

After completing the installation, turn on the water and
recheck water connection for leaks. Apply additional tight-
ening if needed. Do not use thread sealing compound or
tape.
4. Plug in the power cord.
5. Gently push the unit into position.

GRILLE INSTALLATION

1. With a standard blade screwdriver (or 1/4" nutdriver), remove
the grille screw to attach the grille (Figure 11).
2. Remove the control knob by pulling it toward you.
3. Identify the small screw hole located toward the top of the
middle recessed section of the grille.
NOTE
GRILLE SCREW
Figure 11
15
UL106