U-Line Refrigerator/Ice-Maker Combos User Manual page 34

User's Manual
Problem
The unit frosts
up
Water is leaking
out the back
of the unit
Ice cubes
sticking together
Noise during
operation
No ice
Not enough ice
Water leaks into
ice bucket
Fresh food section
on Combo units
too cold
Unit too cold
Possible Cause
Unit is manual
defrost model
Door gasket not
sealing properly
High ambient
temperatures or
humidity
Water supply
connection leaking
Door gasket not
sealing properly
Infrequent use of cubes
Copper water supply
tubing contacting
internal components
Certain sounds are
normal.
Fan blade touching
obstruction (wiring,
foam insulation, etc.)
Bin arm locked in
upright position
No water to unit.
Control set too cold
Ice cube size too
large
Dirty condenser coils.
Water level set too
high
Ice bucket not fully
inserted
Flap door not closed
correctly
Temperature control
set too cold
Inaccurate temperature Properly check temperature.
reading.
32
Remedy
Models SP18, 95, 98,
and Combo 29A and
75A are manual defrost.
Refer to DEFROSTING
Adjust door. See
ALIGNING THE DOOR
Defrost unit manually.
See DEFROSTING
Tighten fitting. See
CONNECTING THE
WATER SUPPLY
Adjust door. See
ALIGNING THE DOOR
Break apart cubes
Carefully bend tubing
away from cabinet and
components
Soft sounds from the fan
and water/dropping
sounds from the ice maker
will be heard.
Remove obstruction
Lower bin arm
Turn on water or contact
plumber.
Adjust control to a
warmer setting
(COUNTER-CLOCKWISE)
Set cube size smaller.
See ADJUSTING ICE
CUBE SIZE
Clean condenser.
See MAINTENANCE.
Set cube size smaller.
See ADJUSTING ICE
CUBE SIZE
Push ice bucket
into place
WATER SUPPLY
Be sure Flap door is
closed correctly.
Set control to warmer setting
(COUNTERCLOCKWISE)