Product Features; Operation; Initial Startup; Ice Harvest Control - U-Line SS1095 Use And Care Manual

MARINE SERIES

4 Product Features

Origins Ice Maker
Model SS1095
All Origins Ice Makers provide high daily ice production
and storage capabilities, and conserve on water, using
only 2-3/4 gallons (10.4 L) to produce approximately 22 lbs
(10 kg) of ice.
• Model SS1095 produces up to 23 lbs (10.4 kg) of ice per
day and will store 12 lbs (5.4 kg).
• The unit features a clear, removable ice bucket.
• Occasional manual defrosting will be required.
• Models SS1095 door features custom Stainless side
handle that is field reversible.
Features and specifications are subject to change without
notice.

5 Operation

Model
SS1095FC
Figure 2
IMPORTANT IMPORTANT
Proper air flow is required for your unit to operate
at its highest efficiently. A grille, located in the base
of the unit (Figure 2), must not be blocked at any
time, or your unit will not perform as expected.

Initial Startup

All U-Line units are shipped with controls that are preset.
No initial adjustments are required.
IMPORTANT IMPORTANT
It is possible that dirt or scale will dislodge in the
water line. Always throw away all ice cubes made
during the first two to three hours of operation.
The power switch is located behind the front grille. A
small opening in the top of the grille (Figure 2) is
provided to access the switch.
Model
SS1095FD
Grille
screw
ULIN_1038_A
Depress the ON/OFF switch (Figure 3) as required to turn
the unit on or off.

Ice Harvest Control

Adjustments are not normally needed. The control is
preset at the factory.
Making adjustments may affect the daily ice
production of the unit.
To adjust the Ice Harvest Control:
1. Remove the front grille (one screw) (Figure 2).
2. Turn the adjusting screw (Figure 4) using a flat tip
screwdriver in a small increment clockwise for a COLDER
setting (slower ice production) or counterclockwise for
a WARMER setting (faster ice production).
3. Replace the front grille (one screw).

Ice Maker

When the ice bucket is full, the ice making mechanism will
shut off. However, the refrigeration system will continue
to cool and maintain the cube supply.
Do not place cans or bottles in the ice compartment
because they will freeze.
SS1095
ULIN_0129_A
Figure 3
IMPORTANT IMPORTANT
ULIN_0131_A
Figure 4
IMPORTANT IMPORTANT
5