Introduction - HP PowerTrust A3589A Manual

HP-UX UPS Monitor Error Messages

Introduction

Introduction
The UPS sends error messages and warnings via its RS-232 port to the computer system.
This appendix lists the messages that may be displayed by the UPS Monitor daemon
(ups_mond) to indicate PowerTrust status or error conditions. The UPS Monitor daemon
monitors the conditions of all PowerTrust units in an HP-UX system. It notifies the system
operator of any PowerTrust alarm conditions and of system power failures via console
messages and syslog. Under some alarm conditions, it might not be able to. The message
may be delayed until AC input power has been restored. In other cases, the message may
be lost. If your computer system is HP-UX version 9.04 (or later), the operating system also
provides automatic shut down of the equipment.
A-2 Appendix A