Logic (Mcu); Getting Started - PRESONUS ioStation 24c Owner's Manual

6

Logic (MCU)

6.1

Getting Started

6
Logic (MCU)
Getting Started
6.1
Logic (MCU)
By default, the ioStation 24c is in Studio One operation mode. To switch to
Logic operation, press and hold the NEXT button while powering on your
ioStation 24c, then press the Mute button to enable Logic (MCU) operation.
Once you have connected your ioStation 24c to your computer, launch Logic.
The ioStation 24c will auto-configure as a Mackie Control Universal device. If
for some reason this does not happen, you will need to enable it manually.
1. If you do not have Advanced preferences enabled, go
to Logic Pro | Preferences | Advanced Tools...
2. Enable "Show Advanced Tools. "
3. Go to Logic Pro | Control Surfaces | Setup...
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
21