Logic (Mcu); Getting Started - PRESONUS FaderPort 16 Owner's Manual

4

Logic (MCU)

4.1

Getting Started

4 Logic (MCU)
4.1 Getting Started
Control
Select Control Mode
MCU
Studio MCU MCU
(Logic) One (Logic) (Cubase) (Sonar)
Control Mode EXIT
MCU MCU MCU HUI SETUP EXIT
Restart
(Logic) (Cubase) (Sonar) Restart
FaderPort
FaderPort
By default, the operation mode on the FaderPort 16 is set Studio One. To switch to
Logic operation, power on the unit while pressing the first two select buttons.
This will open the boot mode screen and you will be given the opportunity to select
which mode of operation you'd like to use. When using the FaderPort 16 with Logic,
MCU
select MCU (Logic) by pressing the Select button below its scribble strip.
Once you have selected your mode, press the Select button below the "Exit" screen
to reboot your FaderPort. This mode will be selected automatically every time you
boot your FaderPort 16.
If you would like to change the mode at any point, power on the
unit while holding down the first two Select buttons.
Power User Tip: From this menu, you can also adjust the fader sensitivity and speed to
fine tune your FaderPort to work the way you want it. Please see Section 8 for more
information on the customized setup modes.
The FaderPort 16 is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
Once you have connected your FaderPort 16 to your computer, launch Logic
to set up the FaderPort 16 as a Mackie Control Universal and a Mackie Control
Extender device. The FaderPort 16 will auto-configure as such in Logic. If for
some reason this does not happen, you will need to enable it manually.
1. If you do not have Advanced preferences enabled, go
to Logic Pro | Preferences | Advanced Tools...
FaderPort™ 16
Owner's Manual
20