PRESONUS ioStation 24c Owner's Manual page 29

7 Cubase / Nuendo (MCU)
7.1 Getting Started
4. Set the MIDI Input and Output to "ioStation 24c. "
5. Click "Apply. "
6. Select MIDI Port Setup and make sure that "In All
MIDI" box is unchecked and then click "OK. "
7. You will need to switch the Mackie Control device to Compatibility
mode. To do this, select the Mackie Control from the Devices menu.
8. From the pop-up windows, select Cubase from the menu.
Your ioStation 24c is now ready to use. Enjoy!
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
27