Flash; Inserting A Pause In The Dialing Sequence; Redial; Viewing A Redial Record - Motorola ML25260 Full User Manual

8.11

Flash

If you subscribe to Call Waiting Caller ID service from your local telephone company and you
receive an incoming call during a call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information (if available) for the waiting call shows on the display.
1. To connect to the waiting call, press FLASH and your first call will be put on hold.
2. To switch between the two calls, press FLASH.
8.12

Inserting a Pause in the Dialing Sequence

Press twice to insert a delay in dialing sequence when a pause is needed to wait for a dial
j
tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone). Each
pause counts as one digit in the dialing sequence, and is shown as
8.13

Redial

1. Pick up the handset, press s or HEADSET and the unit will select the first available line. If both
lines are available, Line 1 will be used first.
Or, press LINE 1 or LINE 2 button to select the line you want.
2. Press REDIAL. The redial number list (last 3 previously dialed numbers) is shown.
3. Using VOL + and VOL - of the navigation button to scroll to the number you want to redial.
DIAL
4. Press softkey to dial the phone number.
NOTE
If the number you dialed is longer than 32 digitals, It will not be saved in the redial list and can't
be redialed.
8.13.1

Viewing a Redial Record

Your phone records up to three previously dialed phone numbers.
1. In idle mode, press REDIAL.
2. Using VOL + and VOL - of the navigation button to scroll to the desired dialed numbers.
3. When the desired number is displayed, press s, HEADSET, a LINE button, or pick up the
corded handset to dial the phone number.
NOTE
If you do not select a LINE button, the line is automatically seized and the number is dialed
accordingly.

8.13.2 Adding a Redial Record in the Directory

In idle mode, press REDIAL.
1.
2. Using VOL + and VOL - of the navigation button to scroll to the desired redial numbers.
3. Press SAVE softkey. The screen displays
4. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter "Lorraine,"
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press PREV or NEXT of the navigation button to move the cursor
forward or backward. Or, press DELETE to delete one character at a time.
A name must be input otherwise the record cannot be stored.
5. Press SAVE softkey. The screen displays
To edit the number, press PREV or NEXT of the navigation button to move the cursor forward
or backward. Or, press DELETE to delete one digit at a time.
6. When you are finished, press
7. Using VOL + and VOL - of the navigation button to scroll to the desired
8. Press SELECT softkey to complete.
NOTE
If an incoming call number matches this record the VIP Tone Melody will ring.
22
ENTER NAME:.
ENTER NUMBER:
SAVE
softkey.
P
in the display.
with the desired redial number.
VIP TONE MELODY.