Specifications; Dimensions And Weights; Attachments/Accessories; Before Operation - Toro Workman Topdresser 1800 Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.

Dimensions and Weights

Length 137 cm (54 inches)
Width 185 cm (73 inches)
Spreading width 152 cm (60 inches)
Inside clear width 175 cm (69 inches)
Height, mounted on 126 cm (49.5 inches)
Workman vehicle
Shipping weight 386 kg (850 pounds)
Dry weight
367 kg (808 pounds)
Hopper capacity
0.5 m³ (18 ft³)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

•
The machine has different balance, weight,
and handling characteristics compared to some
other types of equipment. Read and understand
the contents of this Operator's Manual before
operating the machine. Become familiar with all
controls and know how to stop quickly.
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Stop the machine, shut off the engine, remove the
key (if equipped), and wait for all movement to stop
before you leave the operator's position, Allow
the machine to cool before adjusting, servicing,
cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and safety protective devices are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
Keep all shields and safety devices in place. If
a shield, safety device, or decal is illegible or
missing, repair or replace it before operating the
machine.
Note:
You must use a 1/3 attachment or shield at
front 1/3 area of the cargo zone for the Workman
vehicle when using the topdresser.
•
Tighten any loose nuts, bolts, and screws to
ensure that the machine is in safe operating
condition. Ensure that the machine components
are in place and secure.
•
Ensure that your vehicle is suitable for use with
an implement of this weight by checking with your
vehicle supplier or manufacturer.
14