Mounting The Bike Handle - Stihl FS 410 C-M Instruction Manual

Mounting the Bike Handle

Mounting Bike Handle with Swivelling
Handle Support
1
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
2
4
The machine is shipped with the clamp
moldings (4) mounted on the
handlebar (2).
Do not change the position of the
N
clamp moldings on the handlebar
until the control handle is mounted.
FS 410 C-M K, FS 460 C-M K, FS 490 C-M K
Mounting the Handlebar
To assemble the swivelling handle
support it is necessary to fit a spring in
the clamps and secure them to the
handle support on the machine.
5
Use the spring (5) from the parts kit
N
supplied with the machine.
Push the spring (5) into the lower
N
clamp molding (6).
4
7
Position the clamp moldings (4) with
N
handlebar (2) on the handle
support (7).
Do not rotate the handlebar in the
N
clamp moldings.
8
Raise the grip of the wing screw (8)
N
to the upright position.
English
2
13