Basic Operation; Using The Touch Menu - Sharp PN-85TH1 Operation Manual

Using the touch menu

You can touch the screen to change input mode, volume, and
other settings.
1. Press the TOUCH MENU button.
TOUCH MENU button
2. Touch the screen to change settings.
INPUT
APPLICATION
D-SUB
DisplayPort
HDMI1
HDMI2
OPTION
(8) (1) (2)
(1) Input mode selection
Changes the input mode.
In APPLICATION mode, you can use Android applications.
For details of APPLICATION mode, see the Software
Guide.
* You can change the input mode by pressing the INPUT
button on the remote control unit.
Input mode
APPLICATION APPLICATION
DisplayPort DisplayPort input terminal
HDMI1 HDMI1 input terminal
HDMI2 HDMI2 input terminal
D-SUB D-sub input terminal
OPTION *1 Expansion slot
• When the input mode is changed, the touch panel
connection also changes. You can set whether the
TOUCH PANEL1 terminal or TOUCH PANEL2 terminal
is used in each input mode. (See page 35.)
*1 This is displayed when you have used the expansion slot
to expand the functions.
*2 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 35.)

Basic Operation

(3) (4) (5) (6) (7)
Video Audio
APPLICATION
*2
Audio input
terminal
*2
(2) Volume adjustment
Adjusts the volume.
23
Increases the volume.
Decreases the volume.
Mutes the sound.
Touch again to return the sound to the original
volume.
(3) Settings
Adjust video and configure settings for quad-screen, touch
operation, and other items. (See page 30.)
(4) Backlight off
Turn off the backlight.
When off, the backlight turns on when you press any
button on the monitor or remote control unit.
(5) FREEZE
Freezes the video shown on the monitor.
To cancel, press any button other than the POWER button,
MUTE button or VOLUME button.
Freeze is also canceled when the input signal changes
(switching to no signal, changing the resolution, etc.).
In some cases a residual image may occur. Do not freeze
the video for a long time.
(6) QUAD-SCREEN ON
You can display 4 screens at once. (See page 39.)
When quad-screen is displayed, the icon changes to the
QUAD-SCREEN OFF icon (
(7) RECONFIGURE QUAD-SCREEN
The 4 screens set in SETTING INITIAL SCREEN (see
page 37) are displayed.
(8) Exit touch menu
Closes the touch menu.
TIPS
• The touch menu can also be used with the remote control
unit.
(1) Hold down the INFORMATION button at least 5
seconds.
The touch menu appears.
(2) Select the setting item with the
(3) Set with the or
button.
- The setting is entered.
- Press the RETURN button to exit the touch menu.
).
or button.
button, and press the ENTER
25
E