Connecting The Power Cord; Binding Cables - Sharp PN-85TH1 Operation Manual

Connecting the Power Cord

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input
terminal.
3. Plug the power cord (supplied) into the power outlet.
The supplied cable clamps can be used to clamp the power cord and cables connected to the back of the monitor.
*
Attach the supplied cable clamps (affixing type) to a flat surface, removing any dust or dirt before attaching.
Do not attach over a vent.

Binding Cables

*
Cable clamp
(affixing type)
Affixing point
Main power
switch
1
Power cord (Supplied)
3 For power
outlet
*
Cable
Cable clamp
attachment
Cable clamp
Cable
AC input
terminal
2
15
E