Table of Contents
Advertisement
Engine oil change
If the engine oil is dirty, engine wear will occur more rapidly. Change
the oil at designated intervals. Maintain the oil at the proper level.
OIL CAPACITY: 1.1 L (1.2 US qt, 1.0 lmp qt)
How to change the oil:
1. Remove the oil filler cap/dipstick, the 10 × 15 mm drain bolt and
sealing washer.
Drain the oil while the engine is still warm to assure rapid and
complete draining.
2. Install the 10 × 15 mm drain bolt securely using a new sealing
washer.
CAUTION:
If you drain the oil immediately after stopping the engine, its
temperature will be high and may cause burns.
3. Fill with new recommended oil (see page 41) up to the upper limit.
4. After changing the oil, securely tighten the oil filler cap/dipstick.
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for recycling. Do not throw in the trash or pour it
onto the ground.
84
OIL FILLER CAP/DIPSTICK
SEALING WASHER
10 × 15 mm DRAIN BOLT
OIL FILLER CAP/DIPSTICK
UPPER LIMIT
Advertisement
Table of Contents
