Honda HSM1380i Owner's Manual page 61

MAIN SHIFT LEVER
AUGER CLUTCH SWITCH
DRIVE CLUTCH LEVER
AUGER CLUTCH SWITCH
DRIVE CLUTCH LEVER
5) Move the main shift lever fully
to the end of the forward low
speed range slowly and clear
FAST
the snow.
RANGE
• When the auger hits against
LOW
the road or inclines to a side,
RANGE
adjust the auger housing
position by operating the
auger housing control switch.
• When the snow is small in
volume or light in nature,
move the main shift lever to
the high speed side. Perform
minor adjustment of the main
shift lever to stabilize the
operating speed if necessary.
6) When the drive clutch lever is
released, the auger clutch
switch indicator (green) goes
off, both the auger and blower
stop turning, and the snow
thrower stops moving.
To move from one place to
another, or to change direction,
use the drive clutch lever only.
Release the drive clutch lever
once, then squeeze the drive
clutch lever again.
59