Gigabyte AORUS MASTER Z490 User Manual page 11

Storage Interface Š 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2
SSD support) (M2P_SB)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe
Š
x4/x2 SSD support) (M2A_CPU)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe
Š
x4/x2 SSD support) (M2M_SB)
6 x SATA 6Gb/s connectors
Š
Support for RAID 0, RAID 1, RAID 5, and RAID 10
Š
* Refer to "1-9 Internal Connectors," for the installation notices for the M.2 and SATA
Intel Optane
®
Š
USB Chipset:
Š
- 2 x USB Type-C
1 port available through the internal USB header)
- 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
Chipset+2 USB 2.0 Hubs:
Š
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 2 x 8-pin ATX 12V power connectors
Š
1 x CPU fan header
Š
1 x water cooling CPU fan header
Š
4 x system fan headers
Š
2 x system fan/water cooling pump headers
Š
2 x addressable LED strip headers
Š
2 x RGB LED strip headers
Š
3 x M.2 Socket 3 connectors
Š
6 x SATA 6Gb/s connectors
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x USB Type-C
Š
1 x USB 3.2 Gen 1 header
Š
2 x USB 2.0/1.1 headers
Š
1 x noise detection header
Š
2 x Thunderbolt
Š
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
Š
2.0 module only)
1 x power button
Š
1 x reset button
Š
2 x temperature sensor headers
Š
1 x Clear CMOS jumper
Š
2 x BIOS switches
Š
connectors.
Memory Ready
™
ports, with USB 3.2 Gen 2 support (1 port on the back panel,
™
header, with USB 3.2 Gen 2 support
™
add-in card connectors
™
- 11 - Hardware Installation