Gigabyte AORUS MASTER Z490 User Manual page 104

Step 3:
On the Speakers screen, click the Speaker Configuration
tab. In the Speaker Configuration list, select Stereo,
Quadraphonic, 5.1 Speaker, or 7.1 Speaker according
to the type of speaker configuration you wish to set up.
Then the speaker setup is completed.
B. Configuring Sound Effect
You may configure an audio environment on the Speakers tab.
C. Enabling Smart Headphone Amp
The Smart Headphone Amp feature automatically detects
impedance of your head-worn audio device, whether
earbuds or high-end headphones to provide optimal
audio dynamics. To enable this feature, connect your
head-worn audio device to the Line out jack on the front
panel and then go to the Realtek HD Audio 2nd output
page. Enable the Smart Headphone Amp feature. The
Headphone Power list below allows you to manually set
the level of headphone volume, preventing the volume
from being too high or too low.
* Configuring the Headphone
When you connect your headphone to the Line out jack on the back panel or front panel, make sure the default
playback device is configured correctly.
Step 1:
Locate the icon in the notification area and right-click
on the icon. Select Open Sound settings.
Appendix - 104 -