Usb Turbocharger - Gigabyte AORUS MASTER Z490 User Manual

5-2-7 USB TurboCharger

GIGABYTE USB TurboCharger supports the quick charging technologies
smart phones/tablet devices. It allows you to quick-charge your device(s) connected to the front USB 3.2 Gen 1
type A port (s) with the required mode.
The USB TurboCharger Interface
Using USB TurboCharger
The quick-charging performance of each connector may vary by the device used. Refer to the table below to
select a proper way to charge:
Standard Used as a normal USB 3.2 Gen 1 port Used as a normal USB 3.2 Gen 1 port
Quick Charge
(Note 2)
* Provides maximum output power of 10 W
Apple Fast Charge
(Note 3)
* Provides maximum output power of 15 W
a: Supports quick-charge, r: Not support quick-charge.
While the system is in S3/S4, the Quick Charge and Apple Fast-Charge modes can only deliver 5V
standby power, and the two front USB ports together can provide a total power of up to 10 W and do
not support PME Event Wake Up function.
(Note 1) Quick-charging protocols supported: Apple and Samsung
5V@2A, Qualcomm
®
at 5V/9V/12V (QC2.0), Battery Charging Specification v1.2 DCP 5V@1.5A.
(Note 2) The file transfer function is not supported in this mode.
(Note 3) This is the recommended mode when Apple iPhone 8 / iPhone 8 plus / iPhone X is connected.
Apple
a
a
Quick Charge 3.0 at 3.6V~12V (QC3.0), backward compatible Quick Charge 2.0
™
- 101 -
of Apple's and Android
(Note 1)
Android QC 3.0
™
a
* Provides maximum output power of 18 W
r
divider charging profile at 5V@2.4A and
®
Unique Features
QC 3.0's
™
™