Installation
1. Insert the connectors.
2. Install the Arm #4 side cover to the Manipulator.
NOTE
Be careful not to get the cables caught between the cover
and the Manipulator body.
When replacing the cover, attach the electrical shock
warning label and other labels to the places indicated in
the photos.
C12 Rev.3
RJ45 connector:
Insert the RJ45 connector to the connector on the cover.
F-sensor connector:
Insert the metallic connector to the connector on the cover.
Cross recessed truss head small screws: 7-M4×10 (one side)
Tightening torque: 0.9 ± 0.1 N·m
Maintenance 3. Covers
95