Honda Rebel 2020 Series Owner's Manual page 79

Remove the oil filter with a filter wrench
6.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling center.
Apply a thin coat of engine oil to the
7.
rubber seal of a new oil filter.
8.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
9.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
10.
Oil filter
Required oil
Rubber seal
11.
12.
Engine Oil Changing Engine Oil & Filter
u
Install the new oil filter and tighten.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Fill the crankcase with the recommended
oil ( P. 60, P. 139) and install the oil fill
2 2
cap.
When changing oil & engine oil
filter:
2.9 US qt (2.7 L)
When changing oil only:
2.6 US qt (2.5 L)
Check the oil level.
2
Check that there are no oil leaks.
P. 74
77