Honda Rebel 2020 Series Owner's Manual page 111

Adjust the drive chain.
4.
Hold the adjusting bolts and tighten the
5.
lock nuts.
To hold the adjusting bolt, use the
u
provided 5 mm Hex wrench.
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m)
Lock nut
Hex wrench
Tighten the rear axle nut.
6.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
Recheck the drive chain slack and rear
7.
axle alignment.
2
P. 87
2
P. 43
2
Adjusting bolt
P. 86
Tire Puncture
After installing the wheel, apply the brake
8.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
109