Honda Rebel 2020 Series Owner's Manual page 109

#
Rear Wheel
When using a maintenance stand, be careful
not to damage the wheel speed sensor wire
(CMX500A only) and brake hose.
Removal
Support your vehicle securely and raise
1.
the rear wheel off the ground using a
maintenance stand or a hoist.
Loosen the rear axle nut, lock nuts and
2.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
Remove the drive chain from the driven
3.
sprocket by pushing the rear wheel
forward.
Remove the rear axle nut and washer.
4.
Tire Puncture
Adjusting plate
Pulser ring
CMX500A only
Lock nut
Adjusting bolt Rear axle nut/washer
Rear axle shaft
Drive chain
Removing Wheels
u
Wheel speed
sensor
CMX500A only
Adjusting plate
Lock nut
Adjusting bolt
Continued
107