Chapter 3: Snmp - Tripp Lite UPS SNMPWEBCARD User Manual

SNMP Adapter User's Guide
Chapter 3
Your SNMPWEBCARD allows a UPS to be managed by SNMP tools, using the UPS SNMP Agent and the UPS SNMP MIB.
The UPS SNMP Agent is in the SNMPWEBCARD SNMP firmware. It responds to standard SNMP commands (get, get next and
set) and will generate SNMP traps (messages) if configured to do so.
The MIB (Management Information Base) determines what parameters can be monitored and controlled.
MIB (Management Information Base)
The UPS SNMP MIB must be installed on each management station that will monitor the UPS.
To Install The MIB:
Copy the .MIB file from CD or download to a directory on your system.
Use the Import-Compile command of your SNMP Management program to import the .MIB file.
6
SNMP