Lenovo ThinkSystem RAID 940-16i Installation And User Manual page 7

Figure 1 Card Layout for the Thinksystem RAID 940-16i 8GB Flash PCIe Gen4 Adapter
The following table describes the headers and connectors on the adapter.
Table 2 Table 2 Headers and Connectors
Connector
J2 Standard edge card connector
J4 Default serial boot ROM (SBR) header 2-pin connector. Reserved.
J7 Advanced software options hardware
key header
J8 On-board serial UART connector
J10 Global HDD activity LED header
J11 Global drive fault LED header
J14 CacheVault power module interface
©Copyright Lenovo 2020
Type
The interface between the storage adapter and the host system.
With the PCIe interface, this connector provides power to the board and an I
2-pin connector.
Enables support for selected advanced features.
4-pin connector. Reserved.
2-pin connector.
Connects to an LED that indicates activity on the drives connected to the adapter.
2-pin connector.
Connects to an LED that indicates whether a drive is in a fault condition.
9-pin connector.
Connects the adapter to a CacheVault power module.
Description
2
ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Adapter Installation and User Guide
2
C
4