Operating System Support; Pcie Host Interface - Lenovo ThinkSystem RAID 940-16i Installation And User Manual


Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) support

Global and dedicated hot spare with revertible hot spare support

Automatic rebuild
– Enclosure affinity
– Emergency SATA hot spare for SAS arrays
– Enclosure management
–
SCSI Enclosure Services (SES) (inband)
– SGPIO (sideband) or I2C (UBM)
– DataBolt bandwidth optimizer technology support for compatible expander-based enclosures
– Shield state drive diagnostic technology
1.2

Operating System Support

The adapter supports the operating systems in the following list.

Microsoft Windows

VMware vSphere/ESXi
 Red Hat Enterprise Linux

SuSE Linux

Ubuntu Linux
 Citrix XenServer

CentOS Linux

Debian Linux

Oracle Enterprise Linux
 Fedora

FreeBSD
Visit http://support.lenovo.com, and download the latest firmware and driver for the adapter.
1.3

PCIe Host Interface

The adapter's PCIe 4.0 host interface provides maximum transmission and reception rates of up to 128 GT/s (16 Gb/s per
lane). The tri-mode controller uses a packet-based communication protocol to communicate over the serial interconnect.
Other PCIe host interface features include the following:
 Eight-lane PCIe host interface

PCIe Hot Plug

Power management
– Supports the PCI Bus Power Management Interface Specification Revision 1.2
– Supports Active State Power Management, including the L0 states, by placing links in a power-saving mode during
times of no link activity

Error handling
 High bandwidth per pin with low overhead and low latency
 Lane reversal and polarity inversion

Single-phy (one-lane) link transfer rate of 16 GT/s, 8 GT/s, 5 GT/s, and 2.5 GT/s in each direction
©Copyright Lenovo 2020 ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Adapter Installation and User Guide
2