Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.
Page 3
Conditions and Setting Advantages. –Optional Installation– (select models)* OPTION 1 (UPS Software) Using Tripp Lite Cable (if supplied) connect the DB9 port of your UPS to the DB9 port of your computer. Load software (if supplied) and run the installation program appropri- ate for your operating system.
Page 4
If the UPS alarm sounds or the properly-sized load is not supported, let your UPS charge its batteries for 12 hours and repeat the test. If alarm still sounds, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries.
Page 5
“Mute/Test” Switch to indicate that the UPS’s battery is less than fully charged. If it stays on continuously, contact Tripp Lite for service. The light will flash after you set the “OFF/ON” Switch to the “OFF” position to indicate that the UPS will not provide battery backup during a blackout or brownout.
Page 6
If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment, Fax Modem Protector, please contact the Manager of Technical Support; Tripp Lite; 1111 W. 35th Street, Chicago, Illinois 60609;...