External Battery Connection - Tripp Lite SmartOnline 200703028 Owner's Manual

Installation
Optional Connections
2 USB and RS-232 Serial
Communications
Use the included USB cable (see
DB9 serial cable (see
communication port of your computer to the
communication port of your UPS. Install on
your computer the Tripp Lite PowerAlert
Software appropriate to your computer's
operating system. Your UPS may feature
additional communications ports; these ports
may be connected to additional computers that
have PowerAlert Software installed. Consult
your PowerAlert manual for more information.
EPO Port Connection
3
This optional feature is only for those
applications that require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter. Using the cable provided, connect the
EPO port of your UPS (see
supplied normally closed or normally open
switch according to the circuit diagram (see
3b
). The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
4

External Battery Connection

Check to ensure that the external batteries
you are connecting match the voltage listed
on your UPS's battery connector. All UPS
models come with a robust internal battery
system; select models feature connectors that
accept optional external battery packs (sold
separately from Tripp Lite) to provide
additional runtime. Adding external batteries
will increase recharge time as well as
runtime. See the battery pack owner's manual
for complete installation instructions. Make
sure cables are fully inserted into their
connectors. Small sparks may result during
battery connection; this is normal. Do not
connect or disconnect battery packs when the
UPS is running on battery power.
(continued)
(continued)
2a
) and/or
2b
) to connect the
3a
) to a user-
LOAD 1 LOAD 2
IN OUT EPO
PHONE / DATA PROTECTION
2a
Your model may differ.
LOAD 1 LOAD 2
IN OUT EPO
PHONE / DATA PROTECTION
2b
Your model may differ.
LOAD 1
IN
PHONE / DATA PROTECTION
3a
Your model may differ.
3b
OUTPUT
2 USB
CAUTION
Risk of electric shock
See top of unit for
cautionary markings
4 Your model may differ.
6
OUTPUT
RS-232 USB
WARNING
CAUTION
CONNECT 48 VDC
Risk of electric shock
BATTERY SYSTEMS ONLY
See top of unit for
CONNECTING OTHER
SYSTEMS WILL VOID
cautionary markings
WARRANTY
OUTPUT
RS-232 USB
WARNING
CAUTION
CONNECT 48 VDC
Risk of electric shock
BATTERY SYSTEMS ONLY
See top of unit for CONNECTING OTHER
SYSTEMS WILL VOID
cautionary markings
WARRANTY
LOAD 2
RS-232 USB
CAUTION
Risk of electric shock
See top of unit for
cautionary markings
OUT EPO
4-5
WARNING
CONNECT 48 VDC
BATTERY SYSTEMS ONLY
CONNECTING OTHER
SYSTEMS WILL VOID
WARRANTY
OUTPUT