Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.
Installation Plug your UPS into an electrical outlet. The SmartPro 2200XLT should be connected to a 15-amp dedicated circuit. Plug your equipment into your UPS. Your UPS is designed to support only computer equipment. Connecting household appliances, laser printers or surge suppressors is not recommended.
DB9 Port Connection –Optional–* Using Tripp Lite cable, connect your primary server’s DB9 port to the single DB9 port labeled SMART/LAN 4.1 (which provides complete intelligent RS-232 communications) using the included cable labelled 73-743.** If you have additional computers: Connect them to the DB9 ports labeled BASIC/LAN 2.2 (which provide...
This red light will turn ON if your UPS fails a self-test and/or the UPS battery is less than fully charged. Let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service.
Page 6
It also protects your equipment against damaging surges and line noise. You can remotely reboot con- nected equipment by turningthe UPS OFF and ON using Tripp Lite UPS software. See software instructions for details. SMART/LAN 4.1 (RS-232) Port The RS-232 port connects your UPS to any workstation or server.
AC Surge Suppression : AC Noise Attenuation: AC Protection Modes: *Runtime can be extended with the connection of the appropriate Tripp Lite external battery packs. With the addition of external battery packs, battery recharge time will increase. Smart 2200XLT 2200/1750 27+/11+* 2-4 hrs.*...
Page 8
1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com 93-1503 (9911081)