Optional Installation - Tripp Lite SMART2200SLT Owner's Manual

Optional Installation

These connections are optional. Your UPS will function
properly without these connections.
1
USB and RS-232 Serial
Communications
Use the included USB cable (see
1b
cable (see ) to connect the communication port on
your computer to the communication port of your
UPS. Install on your computer the Tripp Lite
PowerAlert Software appropriate to your computer's
operating system.
EPO Port Connection
2
This optional feature is only for those applications
which require connection to a facility's Emergency
Power Off (EPO) circuit. When the UPS is connected
to this circuit, it enables emergency shutdown of the
UPS's inverter.
Using the cable provided, connect the EPO port of
2a
your UPS (see
normally open switch according to the circuit diagram
2b
(see ). The EPO port is not a phone line surge sup-
pressor; do not connect a phone line to this port.
1a
) and DB9 serial
) to a user-supplied normally closed or
1a
1b
2a
2b
4
4-5