Table of Contents
Advertisement
FIGURE F
Welding is a very complex operation, and we recommend professional training
and certification prior to operating any Welder. This manual is intended only
as a basic training guide and cannot cover all aspects of the welding process.
Washer Spot Welding:
1.
Thoroughly clean the area to be spot welded, removing all paint, rust, dirt, etc. to
ensure proper conduction.
2.
Connect the Ground Clamp (14) as close as possible to the welding area.
(See Figure G.)
3.
Insert the Washer Electrode Socket into the Electrode Holder Mandrel (21) of the
Welding Gun with the rounded end first. Then place a 0.40" (1.0mm) to 0.60"
(1.5mm) thick Washer (2A) securely into the Washer Electrode Socket (1A).
(See Assy. Diagram.)
4.
Plug the electrical plug of the Welder's Power Cord (35) into the nearest 230 volt,
grounded, electrical outlet.
SKU 93457
For technical questions, please call 1-800-444-3353.
6
7
8
OPERATING INSTRUCTIONS
NOTE:
46
45
9
Page 15
8
Advertisement
Table of Contents
