Remove The Upper Case (With Keyboard And Touch Pad); Disassemble The Lcd Module - Lenovo IdeaPad 5 Hardware Maintenance Manual

Figure 52. Remove the LCD module
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD module

Remove the upper case (with keyboard and touch pad)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 46
"Remove the battery pack" on page 47
"Remove the dummy hard disk drive module" on page 47
"Remove the solid-state drive" on page 48
"Remove the solid-state drive bracket" on page 49
"Remove the Wi-Fi card" on page 49
"Remove the RTC battery" on page 50
"Remove the I/O board with cable" on page 50
"Remove the heat sink" on page 51
"Remove the fan" on page 52
"Remove the speaker" on page 53
"Remove the system board" on page 53
"Remove the LCD module" on page 55
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard and touch pad)

Disassemble the LCD module

The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
56
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following