Lower case
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 46
Step 1.
Disconnect the cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove four screws and then remove the battery pack.
Figure 35. Remove the battery pack
Screw specifications
M2 x L5
Go to
https://support.lenovo.com/partslookup
replacement part:
Battery pack
Remove the dummy hard disk drive module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 46
"Remove the battery pack" on page 47
Step 1.
Remove the hard disk drive cable from the battery pack.
Figure 36. Remove the hard disk drive cable
Number of screws
4
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
47