Advertisement
Recommended
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full
Electrical Service
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC INPUT:
230VAC
Maximum input
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A
amps / watts
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection.
type
Voltage
230
compatibility (VAC)
Voltage
12
compatibility (VDC)
BATTERY
Expandable battery
Runtime is expandable with any number of user supplied wet or gel type batteries.
runtime
DC system voltage
12
(VDC)
Battery Pack
98-121
Accessory
(optional)
Battery recharge
Selectable 5/20 amp
rate
LEDS ALARMS & SWITCHES
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional
mode.
Front panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC suppression
840
joule rating
PHYSICAL
Shipping weight
20
(lbs)
Shipping weight
9.1
(kg)
Cooling method
Multi-speed fan
Unit Dimensions
7 x 8.75 x 9
(HWD/in)
Unit Dimensions
17.78 x 22.23 x 22.86
(HWD/cm)
Shipping
12.5 x 11 x 10.75
Dimensions
(HWD/in)
Shipping
31.75 x 27.94 x 27.31
Dimensions
(HWD/cm)
Unit weight (lbs)
18.6
sealed lead acid battery (optional)
APSRM4
accessory when used in inverter
Advertisement
