Garmin G3X TOUCH SYSTEM Flight Manual Supplement page 73

The GPS Status will display one of the following conditions:
Autolocate—Receiver is looking for any satellite whose almanac
•
has been collected, which can take up to 5 minutes
Searching the Sky—Receiver is looking for satellites
•
Acquiring Satellites—Receiver is looking for and collecting data
•
from satellites visible at its last known or initialized location, but has
not acquired a fix
2D GPS Location—At least three satellites have been acquired
•
and a two-dimensional location fix has been calculated. "2D
Differential" appears when you are receiving DGPS corrections in
2D mode
3D GPS Location—At least four satellites have been acquired and
•
a three-dimensional fix has been calculated. "3D Differential"
appears when you are receiving DGPS corrections in 3D mode
Lost Satellite Reception—the receiver is no longer tracking enough
•
satellites for a 2D or 3D fix
To view GPS receiver status information:
Turn the large Knob associated with the MFD to select the Info
•
Page.
or:
Touch the Page Navigation Bar on the MFD.
•
Touch the Info Page from the Select Page menu.
•
7.2.1.6 Secure Digital (SD) Cards
The G3X Touch data card slot uses Secure Digital (SD) cards. The SD card
can be used for software updates, checklist files, flight data logging,
exporting Track Logs/User Waypoints, and Importing/Exporting Flight Plans.
To Install an SD card:
Insert the card into the slot at the lower, center, front of the bezel.
•
Be sure the SD Card contacts are facing downwards.
Firmly push the card into the unit. It is not necessary to force the
•
card.
If you insert an SD Card and get a card format not recognized message,
try removing the card and reinserting it. If the card is still not recognized,
contact Garmin Product Support or your Garmin dealer.
DOCUMENT NUMBER
L400-912816 ISSUEFEBRUARY 21 2020
FLIGHT MANUAL STEMME S12
PAGE: 7-11
REVISION: --
DATE: --- --, -----