Bosch ErgoMixx MSM6 Series Instruction Manual page 6

en Whisk
X Fig. F
■ Put ingredients into the blender jug.
■ Place the gear attachment on the base
unit and lock into position.
■ Insert the whisk into the gear attach-
ment and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig. F-3).
■ Insert the mains plug.
■ Set required speed using the speed
control (recommendation: high speed).
■ Grip base unit and blender jug and
press required ON button.
■ Release the ON button after processing.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the gear attachment.
■ Remove the whisk from the gear
attachment.
Cleaning
Warning!
Never immerse the gear attachment in
liquids and do not clean under flowing water
or in the dishwasher. Wipe the gear attach-
ment with a damp cloth only.
Note: The whisk can be cleaned in the
dishwasher.
In Fig. G you will find a summary of how to
clean the individual parts.
Subject to change without notice.
6