Attaching Brackets For 19-Inch Racks For Ip-30 Compliance (Optional); And Figure - Cisco IE 3010 Installation Instructions Manual

Switch Installation
Installing the Switch
Figure 11 Attaching Brackets for 19-Inch Racks
C i sc o C G
S 2 5 2 0
1 Phillips flat-head screws
2 Cable-side-mounting position

Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)

Before installing the mounting brackets, you need to install the rubber plugs in the unused mounting holes. The rubber
plugs are not supplied with the switch. You can order a kit (part number IE-3010-IP30KIT) containing the rubber plugs.
You can order a kit (part number IE-3010-IP30KIT) that contains the rubber plugs.
Figure 12 on page 22
Figure 13 on page 23
shows a close-up of the rubber plug. You can install the rubber plugs in the holes as shown in
and Figure 14 on page 24.
1
3
1
3 Power-supply-side mounting position
21
2