Cisco IE 3010 Installation Instructions Manual page 15
Hide thumbs
Also See for IE 3010:
- Hardware installation manual (98 pages) ,
- Getting started manual (27 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Switch Installation
Installing the Switch
Attaching Brackets
Figure 20
Attaching 19-inch Rack Brackets
1
1
Phillips truss-head screws
Attaching Brackets for IP-30 Compliance (Optional)
1.
Insert the rubber plugs in the appropriate holes on both sides of the switch. See
Note:
The rubber plugs are not supplied with the switch. You can order a kit (part number IE-3010-IP30KIT)
containing the rubber plugs.
2.
Use a screwdriver or pen to completely push in the rubber plugs. See
3.
Install the brackets on both sides of the switch. See
Figure 12 on page
Figure 22 on page
32.
31
Figure 21 on page
32.
22.
Advertisement
Table of Contents
