Smeg SFP6401TVN1 Manual page 44

During the Pyrolytic cycle, the fans
produce a more intense noise due
to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective
heat dispersal. At the end of the
Pyrolytic cycle, the fans will
continue to operate for long
enough to prevent overheating the
walls of adjacent units and the
front of the oven.
During the first Pyrolytic cycle,
unpleasant odours may be
produced due to the evaporation
of oily substances used in the
manufacturing process. This is
normal and will disappear after the
first Pyrolytic cycle.
If the Pyrolytic cycle gives
unsatisfactory results at the
minimum duration, it is
recommended to set a longer time
for subsequent cleaning cycles.
98
Cleaning and maintenance
Setting of a programmed Pyrolytic cycle
It is possible to program the Pyrolytic cycle
start time like all other cooking functions.
1. Turn the Function knob
following appears on the display.
2. Press the Select knob
that you wish to use the Special functions.
The Defrost function screen appears on the
display.
3. Turn the Select knob
Pyrolytic function is selected.
The duration of the Pyrolytic cycle appears
on the display.
until the
to confirm
until the