Smeg SFP6401TVN1 Manual page 43

3. Turn the Select knob
Pyrolytic function is selected.
The duration of the Pyrolytic cycle appears
on the display (factory set to 2 hours).
4. Turn the Select knob
duration of the Pyrolytic cycle from a
minimum of 2 hours to maximum of 3 hours.
Recommended pyrolytic cycle
duration:
• Light dirt: L01 - 02:00.
• Medium dirt: L02 - 02:30.
• Heavy dirt: L03 - 03:00.
5. Press the Select knob
parameters.
6. Wait 3 seconds before starting the
function.
Cleaning and maintenance
until the
to set the
to confirm the
Pyrolytic cycle
7. Approximately 2 minutes after the
Pyrolytic cycle starts, the Door lock
indicator light
that the door is locked by a device that
prevents it from being opened.
It is not possible to select any
function once the door lock device
has been activated.
8. At the end of the Pyrolytic cycle,
flashes on the display and a
buzzer will sound that can be
deactivated by opening the door or
pressing/turning one of the two knobs.
The door remains locked until the
temperature inside the oven returns
to a safe level.
9. Wait for the oven to cool down (the
Door lock indicator light
10.Collect any residues that may have
been deposited inside the oven cavity
using a damp microfibre cloth.
11.Turn the Function knob
from the function.
comes on to indicate
turns off).
to 0 to exit
97