Ariens LM21AL Owner's/Operator's Manual page 9

5
1. Short
Panhead
Screw
2. Dashboard
3. Speed
Selector Knob
8. Slide throttle control and speed selector
knobs (if equipped) over the levers and
secure with nuts and machine screws
provided.
NOTE: Throttle control knob on 911088, 096
snaps into place on throttle lever.
Grass Collector
1. Assemble grass collector (Figure 8).
Align cloth bag with groove in the plastic
frame.
Snap border tabs into hooks along the
groove in the plastic frame.
Slide metal frame through loops in cloth
bag and into its seats in the plastic frame.
Hook plastic lip over metal frame.
Secure metal frame to plastic frame with
two screws.
1
2
3
4
4. Throttle
Control Knob
5. Long Panhead
Screw
Figure 7
1
2
5
7
1. Plastic
Frame
2. Screws
3. Border Tabs
2. Install grass collector on unit.
Lift rear discharge deflector.
Align grass collector between handlebars.
Fit grass collector lip onto notch in mower
deck.
Make sure there are no gaps between the
collector and the mower deck.
Let rear discharge deflector rest on
collector.
GB - 9
5
6
4. Cloth Bag
5. Loops
6. Plastic Lip
7. Metal Frame
Figure 8
2
3
4
OM1391