Table of Contents
Advertisement
3 – Installation
(continued)
3-5 Installation Within Row
After inserting the clevis pins, insert a cotter pin
6
hole at the end of each clevis pin. (The straight section of the
cotter pin goes through the hole.)
3-6 Ground Connection
After installing the SRCABLELADDER accessory, determine
1
where to place ground brackets by noting the distance between
one end of the ladder and the grounding post
nearest SRCABLETRAY accessory.
2
Place a ground bracket
near the end of the SRCABLELADDER
B
accessory's leg and use a hex-head bolt
3
Use the included hex nuts and lock washers
of the included ground cable
of the nearest SRCABLETRAY accessory and connect the other
end to the grounding post
J
SRCABLELADDER accessory. Repeat steps 1 to 3 for the other
end of the SRCABLELADDER accessory.
(continued)
through the
G
at the corner of the
A
to secure it.
C
to connect one end
G
to a grounding post
at the corner
H
I
of the ground bracket attached to the
G
6
A
1
2
G
I
3
7
B
C
J
G
H
Advertisement
Table of Contents
