Advertisement
Step by step assembly instructions
Step Six
1.
ttach 4x wooden dowels (E) into the pre-drilled holes on panel (3) as shown.
2.
Place 4x cam lock (B) into the holes on panel (3) as shown, arrow pointing toeards the bolt.
3.
ttach 4x metal dowels ( ) into the pre-drilled holes, use a screwdriver to turn fitting ( ) clockwise to fix.
4.
Turn the panel, then attach 4x metal dowels ( ) into the pre-drilled holes as shown.
Use a screwdriver to turn fitting ( ) clockwise to fix.
B
E
A
3
Step Seven
1.
Fix two rails (7) onto side panel (2) using 6x screw (M)
Pay attention to fix in the front part of side panel (2) the rail with the metal dowels fixed as shown.
Repeat for the other side panel
B
A
E
M
7
7
B
2
A
Page 7
NAN 01/14
Advertisement
