Step by step assembly instructions
Step Sixteen
To prevent possible overbalancing we recommend that this unit is secured to a suitable wall
by using "L" Bracket (N) fitted to the Top of the unit.
1.
Loosen the screw (I) and fix "L" bracket (N) to the wall using spacer (P) and appropriate wall plug and
screw (not included)
2.
Tighten Screw (I)
See wall fixings guide at the end of booklet.
Important:
Take care when
drilling the wall
that you do not
drill into any
pipes, wires etc.
If in doubt, consult
an expert.
wall plug and
screw not
included.
P
I
N
P
Page 12
NAN 01/14