Advertisement
Quick Links
John Lewis
Thank you for purchasing this Napoli chest 6 drawers. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product.A full checklist of compo-
nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you are missing some fittings please contact our spare parts helpline on 0330 005 9435.
Opening hours are 9am - 5pm Monday to Friday.
Napoli chest 6 drawers
Screwdriver
Stock Code: 80310605
Drill
Eye protection
0
0
20
30
40
50
60
70
80
90
00
0
20
30
40
50
0
2
3
4
5
6
Ruler/tape
Small hammer
measure
Page 1
NAN 01/14
Advertisement
Related Manuals for John Lewis Napoli 80310605
Summary of Contents for John Lewis Napoli 80310605
- Page 1 Please check the pack contents before attempting to assemble this product.A full checklist of compo- nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings checklist Metal dowel x 48 Long cam lock x 4 Middle cam lock x 24 30mm Short cam lock x 20 Wooden dowel x 56 25mm Nail x 30 Nail guide x 1 11mm Euroscrew x 24 15mm Screw x 2 30mm Screw x 24 30mm Screw x 24 Bracket “L”...
-
Page 3: Parts Checklist
Parts checklist Page 3 NAN 01/14... - Page 4 Step by step assembly instructions Step One ttach 6x metal dowels ( ) into the pre-drilled holes on top panel (1) as shown. Use a screwdriver to turn fitting ( ) clockwise to fix. ttach 6x metal dowels ( ) into the pre-drilled holes on bottom panel (17) as shown. Use a screwdriver to turn fitting ( ) clockwise to fix.
- Page 5 Step by step assembly instructions Step Two ttach 6x wooden dowels (E) into the pre-drilled holes as shown on side panels (2) as shown. Place 4x cam lock (C) into the holes on side panels (2) as shown, arrow pointing towards the bolt. ttach 2x metal dowels ( ) into the pre-drilled holes on side panel (2) as shown.
- Page 6 Step by step assembly instructions Step Four ttach 2x wooden dowels (E) into the pre-drilled holes on rail (5) as shown. Repeat for all rails Place 2x cam lock (C) into the holes on rail (5) as shown, arrow pointing towards the bolt. Repeat for all rails Step Five ttach 4x metal dowels ( ) into the pre-drilled holes, in only two of four rail (7) as shown.
- Page 7 Step by step assembly instructions Step Six ttach 4x wooden dowels (E) into the pre-drilled holes on panel (3) as shown. Place 4x cam lock (B) into the holes on panel (3) as shown, arrow pointing toeards the bolt. ttach 4x metal dowels ( ) into the pre-drilled holes, use a screwdriver to turn fitting ( ) clockwise to fix. Turn the panel, then attach 4x metal dowels ( ) into the pre-drilled holes as shown.
- Page 8 Step by step assembly instructions Step Eight ttach rails (4) (5) onto side panel (2) and divider (3) as shown. Ensure metal dowels ( ) and wooden dowels (E) are aligned correctly with the holes of matching parts before attaching. Pay attention to the correct position of rail (4) with the bracket (N) fixed .
- Page 9 Step by step assembly instructions Step Ten ttach top panel (1) onto side panels (2) and divider (3) as shown. Ensure metal dowels ( ) and wooden dowels (E) are aligned correctly with the holes of matching parts before attaching. Secure top panel (1) onto side panels (2) and divider (3) using a screwdriver to turn fitting (B)(C) clock- wise to fix.
- Page 10 Step by step assembly instructions Step Twelve Position back panel (6) as shown ttach 6x support foot (O) to bottom (17) with 12x screw(M). Step Thirteen ttach back panel (6) onto back side of the unit using 30x nails (F), with the help of the nail guide (G). Important: The cabinet MUST be ‘square’...
- Page 11 Step by step assembly instructions Step Fourteen With help of an assistant, carefully stand up the unit upright Important: Two people are needed here Step Fifteen Fix runner parts (Z1) (Z2) through holes shown in the detail view using euroscrews (H). Page 11 NAN 01/14...
- Page 12 Step by step assembly instructions Step Sixteen To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by using “L” Bracket (N) fitted to the Top of the unit. Loosen the screw (I) and fix “L” bracket (N) to the wall using spacer (P) and appropriate wall plug and screw (not included) Tighten Screw (I) See wall fixings guide at the end of booklet.
- Page 13 Step by step assembly instructions Step Seventeen ttach 4x wooden dowels (E) into the pre-drilled holes on drawer sides (11) (12) as shown, Place the cam lock (D) into the holes on drawer sides (11) (12) as shown, arrow pointing towards the bolt, ttach 2x metal dowels ( ) into the pre-drilled holes on drawer front (8).
- Page 14 Step by step assembly instructions Step Nineteen Slide drawer bottom panel (9) into the drawer box grooves. Position drawer front (8) onto drawer box, turn locking nuts (D) clockwise to lock. Repeat for the second drawer. Step Twenty ttach 4x wooden dowels (E) into the pre-drilled holes on drawer sides (14) (15) as shown. Place the cam lock (D) into the holes on drawer sides (14) (15) as shown arrow pointing towards the bolt, ttach 4x metal dowels ( ) into the pre-drilled holes on drawer front (13).
- Page 15 Step by step assembly instructions Step Twenty-one Fit the RH (14) and LH (15) drawer sides to the drawer back (16) using 30 mm screws (L), Repeat for all drawers. Step Twenty-two Slide drawer bottom panel (9) into the drawer box grooves, Position drawer front (13) onto drawer box, turn locking nuts (D) clockwise to lock.
- Page 16 Step by step assembly instructions Step Twenty-three Pull out the runners, then ensure plastic securing pegs are to the OUT position. Page 16 NAN 01/14...
- Page 17 Step by step assembly instructions Step Twenty-four Slide the drawer box tilted until the stop. ttach the drawer box leaning on the runners. Push the plastic securing pegs in the IN position Page 17 NAN 01/14...
- Page 18 Step by step assembly instructions Step Twenty-five Use the small plastic knob of the runners to align the drawers if needed. Page 18 NAN 01/14...
-
Page 19: Care And Maintenance
Wall fixing - if in doubt seek professional advice Wood Brick or Masonry Cavity wall If xing to wood Use an appropriate Special toggle make sure that it wall plug provided you wall plugs are isn't chipboard as are sure your wall is needed. -
Page 20: Safety Instructions
It must under no circumstances be used free-standing.No liability will be accepted for damage or injury caused by inadequate fixing or use without fixing. PLEASE KEEPTHESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171Victoria Street London SWIE 5NN www.johnlewis.com Page 20...